UTC TruVision IP Dome Uživatelský manuál stáhnout pdf (Strana 27)

2BChapter 3: Network and streaming configuring

TruVision IP Dome Open-Standards User Manual 23

Configuration folders

Description

Alarm parameters

Defines how the camera handles alarms such as input type,

notification of alarms, and response schedules and duration.

See “Alarm parameters” on page 30.

eployment time Defines the schedules during which events are registered.

See “Events scheduling” on page 31.

User management

Defines

who can use the camera, their passwords and access

privileges. See “User management” on page 41.

HDD

management Defines how to format the SDHC card used in the camera.

See “Formatting the SDHC card” on page 44”.

Remote upgrade

Defines how to upgrade the camera’s firmware. See

“Upgrading the firmware” on page 44.

Default

Restores default settings. See “Restoring default settings” on

page 44.

Reboot device

Reboots the camera. See “Rebooting the camera” on page

45.

Information about the camera

Use the “Basic information” menu to define the camera name and RS-485 bus

ID. The default device name is “IP Camera” and device ID is 88. The camera can

have up to 12 alphanumeric characters in its name.

Several parameters are also prepopulated and cannot be changed manually

such as the camera, encoder, panel and hardware versions.

Network parameters

Accessing the camera through a network requires that you define certain network

settings. Use the “Network Parameters” folder to define the network settings. See

Figure 11 on page 24 for further information.

Note: When a network parameter is modified, the camera will prompt you to save

and reboot.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 65 66

Žádné komentáře

UTC TruVision IP Dome Uživatelský manuál Strana 27